skip to main
|
skip to sidebar
misc stuff
Saturday 2 June 2007
Inside ready for glassing. Looks like a kayak now!
No comments:
Post a Comment
Newer Post
Older Post
Home
Subscribe to:
Post Comments (Atom)
Blog Archive
►
2008
(3)
►
June
(1)
►
May
(1)
►
March
(1)
▼
2007
(33)
►
November
(1)
►
September
(4)
►
August
(6)
▼
June
(22)
next project?
Now all done! A poor picture of me, but it's the ...
Time to go for a paddle! I look a bit more confide...
Fitting out the cockpit. I used a commercial seat ...
This pic shows the handle on the screw in day hatc...
As previously descibed I went for wooden hatches. ...
Easter 2007. A long weekend at our family place in...
Deck Fittings. Lots of thinking time went into the...
Starting to think about the rigging. I didn't want...
Sanding the filler coat smooth. Dull, but needs do...
Out of order but I've just remembered. Before glas...
Digression over, and back to building. Glassing th...
Poor diagrams, but hopefully they will show why I ...
The bolts for the footrests in position, with some...
Inside now glassed. This was the first time the ka...
Inside ready for glassing. Looks like a kayak now!
At this stage I departed from Duane's instructions...
Here you can see I have epoxied the joints togethe...
Nearly fully wired. Now upside down to make it eas...
This picture shows the working setup.A ladder form...
I'd been thinking about building a sea kayak on an...
I started building the Point Bennett last autumn. ...
About Me
The Craftsman Programmer
I run the engineering department at a Telecoms equipment manufacturer - having joined as a graduate trainee programmer. I must have been bad in a past life to deserve this.
View my complete profile
No comments:
Post a Comment